Project Gallery

COMING SOON !
WATCH OUR VIDEO
Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and
scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages,
and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum
Like us on Facebook for news, pics and updates
Medical:
- Lawnwood Regional Medical Center, Ft. Pierce, Florida – A multi-story hospital that was an addition to an existing structure. The project offered the additional challenges of matching the survey of the existing structure and multiple large moment frames that were full penetration welded
Columns Beams AB Plan Framing Plan Elevations Sections
- Holmes Medical Center RTU Service Platform, Melbourne, FL – A small mechanical platform for a new RTU unit on an existing roof structure that required and immediate turn around.
Columns Ladder Plan Sections - Park Royal Psychiatric Hosptial Addition , Ft. Meyers, Florida – A multi-story that was an addition to an existing structure. We supplied the detailing for the structural steel. This project evolved through several changes including several to the screenwall and sunshades also well as beam sizes and floor elevations.
- New Classroom Building for Daniel Memorial Properties – Located in Jacksonville, Florida – A new single story classroom building that had a radiused store front structure and several high and low areas in the roof. Notice the main buildin column at the front entrance is built to resemble a lower case “d”.
- Addition to Palms West Hospital in Loxahatchee, Florida – This project was an addition to the roof and penthouse. The exiating penthouse was converted into a new story and a new penthouse was added on top. We were able to get the original fabricators drawings and incorporating that with the field dimension, we were able to produce very accurate shop drawings for field attachment to the existing structure.
- CMC Medical Complex Plaza in Lincolnton, North Carolina
Retail:
- Publix in Titusville, Florida – One of several Publix stores we have done in the area. The basic geometry of the stores is similar with the custom components usually being the canopy / entrance and the retail buildings on either side, if required.
Columns Beams AB Plan AB Sections Framing Plan Sections
- CVS in Palm Coast, Florida – A new larger store with a mezzanine and stairway. This store was detailed simultaneously with the CVS at Port Orange
Columns Beams Dumpster Gate Mezz Plan Roof Plan Dumpster Gate Plan
- CVS in Port Orange, Florida – A new larger store with a mezzanine and stairway. This CVS was detailed simultaneously with the CVS at Palm Coast
Columns Beams AB Plan AB Sections Mezz Plan Roof Plan High Roof Plan
- Seminole Shoppes in Neptune Beach, Florida – A small strip mall that was unique in the amount of steel and bracing required for the size of the project.
Columns Braces Beams Low Plan Roof Plan Elevations Sections
- Retail at outparcel “C” in Palm Coast Town Center, Palm Coast, Florida- A small strip mall that required a quick turnaround to meet the approval schedule.
Columns Beams AB Plan Elevations Roof Plan
- Dollar Tree in Tavares, Florida – A new retail store for the Dollar Tree chain of stores.
Columns Gates AB Plan Roof Plan Sections Dumpster Gate Sections - Coggin Nissan in Jacksonville, Florida – An addtion to an exsiting auto dealership. We suplied the strucural and misc steel.
- Coggin Ford in Deland Florida – An new store front and fascade to an existing auto dealership.
Office Complex
- Haines City Medical Office Building, Haines City, Florida – A new multi-story office complex. This project received multiple design changes including the addition of two new canopies in separate revisions.
Columns Beams Braces 2nd Floor Plan Sections Canopy Plans
- Beaver Street Project, Jacksonville, Florida – A custom project requiring the existing exterior concrete walls to stay in place within the original structure. The interior structure was gutted completely and the roof removed. Our challenge was to design the steel for the interior. We had to detail the project with erectability from inside the project as a concern. We detailed all the structural and miscellaneous steel.
Embeds Columns Beams Bent Plates Ladders 2nd Floor Plan Roof Plan Lintel Plan - New Office Building for Revolution Technologies in Melbourne, Florida
Schools
- Indian River Charter School, Vero Beach, Florida – A new school building added onto an existing charter school campus. The project included hip and valley steel and joists.
Embeds Columns Beams Truss AB PLan Framing Plan Sections
- Apopka Middle School, Apopka, Florida – A new two-story building added to an existing school campus. This project included several design revisions including deletion of approximately 50% of the curved northwest building after the approval process.
Embeds Columns Beams AB Plan Framing Plan
- Ormond Beach Middle School, Ormond Beach, Florida – A new school building for the existing school campus. This project was unusual in that the framing members were extremely large as well as the design loads. Some of the member sizes were w40 for beams and w30 for the columns at the moment frames. All of this required custom connection design. We worked hand-in-hand with our customer’s engineer to produce the exact connections they required.
Columns Beams Framing Plan Sections Elevation
- Choices in Learning Charter School, Longwood, Florida – A new multi-story building for a school campus. This project had a tight schedule and included many rolled pieces at the entrances. We worked closely with the fabricator’s in-house miscellaneous detail to locate the steel needed to support the stairs. Upon completion of the erection we were told that “every piece fit with precision”
Loose Clips Columns Beams HSS Beams Partial 2nd Floor Partial 2nd Floor Partial 2nd Floor Section - Edgewater High School, Edgewater, Florida – Multiple new buildings for an existing school campus. We produced shop and erection drawings of the stairs, rails, and ladders. In addition we produced shop and erection drawings for new rails at an existing building once the exact concrete measurements were obtained.
Rails Stair Platform Stair Plan Stair Elevation Section Section - St. Cloud High School, St. Cloud, Florida – We produced shop and erection drawings of the stairs, rails, grating and ladders at multiple new buildings for this school campus. We also produced shop and erection drawings for new rails at an existing building, once the exact concrete measurements were obtained. Many pieces were detailed and submitted one building at a time to keep in line with the erection sequence required by the general contractor.
Stair Platform Rail Stair Plan Stair Elevation Sections Sections - Addition to School “L”, St. Augustine, Florida – This was a new multy story building with four wings for an existing school. The design was good and this project moved very quickly.
- New Gym and classroom for Palmer Catholic Academy, Ponte Vedra Beach, Florida – This was a new addition to an exiasting Catholic school. The building housed a new gym area, and more classrooms. Also we had to tie the new walkway into the existing building.
- New Life Center for Calvary Church in Charlotte, NC – This new facility added on to an existing church campus. The new building housed a gym, new classroms, and multi purpose areas. SOme of the challenging parts of this project were the multi slopes on different parts of the roof, the multiple design changes, and the wall connector area into the existing building.
- Stumptown Elementary School in Huntersville, North Carolina
- Viera Charter School in Brevard County, Florida
- Johnston Annex Hall Stairs and Rails at Florisa State College in Tallahassee, Florida
- Magnolia Charter School in Shreveport, Lousiana
- Valencia College West Campus Building 10 in Orlando, Florida
- Beach High School in Savannah, Georgia
Banks
- Palm Beach Community Bank, Palm Beach, Florida – A new multi-story bank. This project required quick-turn-around for design and approval.
Columns Beams Roof Frames 2nd Floor Plan
Government Facilities
- Brevard County Detention Center, Brevard County, Florida – A new single story kitchen complex.
Embeds Columns Beams Ladders AB PLan Roof Plan Sections
- Fort Riley Army Base, Fort Riley, Kansas – A new recreation facility for troops on base. We met challenges in this project of design changes and additions, even during fabrication.
Columns Ladder HSS Beam AB Plan AB Section Partial Roof Plan Entrance
- Port Canaveral Police Department, Port Canaveral, Florida – A unique building from an architectural viewpoint that had a very small budget. We incorporated several design changes via RFI process into the final product.
Columns Beams Angles Frames AB Plan Roof Plan Elevations Sections
- Rasmussen College, Ocala, Florida – A new building for a college campus. This project required us to readjust the work points of the skewed walls and radius walls several times to achieve the desired look of the project.
- Rockledge Police Department, Rockledge, Florida – A new multi-story building that had to be completed within a tight budget and schedule.
Beams Columns Angles Beams 2nd Floor Plan Roof Plan Sections - Satellite Operations Support Center – A new multi story facility located at Cape Canaveral, Florida designed by the Army Corps of Engineers. We were awarded the contract to detail the misc steel (stairs & rails) to accompany the detailer that was detailing the structural steel.
Stair Plan1 Sections Stair Plan2 Sections Sections M1 M1A M1B - New apartments for The Village at Overton Park, Lubbuck, TX – This is a new multy story structure that include new dorm rooms and parking area. Most of the structure was built out of wood, with certain high stressed areas getting structural steel framing.
- New Apartments and Retail Shoppes at Mosaic Village in Charlotte, NC – The is a new mulit story facility that included new dorm rooms and reatails shops. Most of the structure was made out of wood with the exception of the drive through area, lobby, lintels and sunshades.
- Launch SUpport Facility Expansion at Cape Canaveral, Florida
- Emergency Operations Center for Volusia County, Florida
Theaters
- Epic Theaters at Palm Coast, Florida – A major multiplex theater, a first for the City of Palm Coast. We were fortunate enough to be able to provide the structural steel, stairs, rails, and ladders for a complete package.
Rake Beams Beams Partial Roof Plan Partial Roof Plan Partial Roof Plan Partial Roof Plan Sections
- Epic Theaters at St. Augustine, Florida – A major multiplex theater. Much like the Palm Coast Theater project, we provided a complete package that included the structural steel, stairs, rails, and ladders. In addition, we worked with the engineer to help design connections for several of the mechanical mezzanine beams that had no support.
Columns Beams Partial Mezz Plan Partial Mezz Plan Sections Partial Roof Plan Partial Roof Plan Stair - Epic Theaters at Deltona, Florida – A major multiplex theater. The was the largest of the Epic theaters we have done to date, with a second floor for addtional offices. We supplied all the structural steel and misc steel as well as dumpster gate. CAUTION THIS IS AN EXTREMELY LARGE MODEL AND WILL TAKE A FEW MINUTES TO LOAD. We have model in extra material such as chairs, windows, sign, and store front.
Exotic and Custom Structures
- Aloft Swoof Roof Structure, Jacksonville, Florida – A custom roof structure to support signage and lighting for an existing multi-story condominium complex. This project required numerous design revisions. We sent multiple models and erection drawings to help the architect and engineer achieve the required look for the intended purpose. Even after the approval process and into fabrication more design changes were implemented.
Frame Frame Sections Beams Plan (low) Plan (high) Sections Elevation - Boeing Welcome Center, Charleston, SC – A new welcome center for Boeing new plant in Charleston. This building is where visitors enter and exit the facility, get passes as well as learn about the facility. We provided modeling of the exterior metal panels (shown as orange). We were able to get the model fron the structural steel detail since they used Tekla as well. The we were able to “build the skin” around the structure. We were given some basic information such as radius at a few points and some architectual drawings for rendering purposes, but most of the actual working dimensions and fitment was up to us to determine. We also were able to help with a presentation at an onsite meeting. We added concrete, glass windows & doors, and true stlye joist to make the model come alive.
- New Support Structure for the Space Shuttle Atlantis at Cape Canaveral, Florida
- New Slide Stair at New Atlantis Support Structure at Cape Canaveral, Florida
- New Outriggers for Port Canaveral Cruise Terminal Expansion, Florida
- Misc Pieces for Port Canaveral Cruise Terminal Expansion, Florida
- New Out Buildings for Port Canaveral Cruise Terminal Expansion, Florida
- New Pedestrian Walkway for Port Canaveral Cruise Terminal Expansion, Florida
- New Entry Canopies for Port Canaveral Cruise Terminal Expansion, Florida
Restaurants
- Seasons 52 restaurant located at St.Johns Town Center, Jacksonville, Florida – A new resturant location for the Seasons 52 chain. This project was a free standing steel structure that had no concrete walls. This project moved forward quickly with the only revision being that the roof had to be raised 4″ in elevation from the original design.
AB Plan Beams Columns Elevations Ladder Roof Plan Sections - Fogo De Chao restaurant located in Orlando, Florida – A mew resturant location for the Fogo De Chao chain. We supplied all the structural and misc steel, including things like the dumpster gate. Working in a 3D environment allowed up to cut the main tower structure with precise cuts to the HSS members for a quick erection.